RUST-X is an acidic solution. Care should be taken to avoid skin and eye contact. Always wear rubber gloves and goggles when handling the product. If skin contact occurs, wash with soap and water. If eye contact occurs, flush with water for 15 minutes and contact physician. Do not ingest. If ingestion occurs, induce vomiting and contact physician.

Product may leave discoloration on concrete or wood.

KEEP OUT OF REACH OF CHILDREN

Prepare
Remove flaking paint and scaly rust with brush or sand paper. It is not necessary to remove or pre-treat normal rusty areas.

Apply
RUST-X may be applied by brush, roller, spray or by dipping rusty object in bath. Apply generously to rusted area and allow to dry. Rusty areas will turn black in 15 to 20 minutes. Re-apply, if necessary, to achieve a uniform, glossy finish.

Paint
RUST-X coating can serve as a primer or undercoating for paint . Suitable paint may be applied to surface in 4-6 hours.

Typical Properties 

Physical State @ 77 Degrees F	Liquid
Active Content, %	59
PH, 5% solution in 3:1 IPA/water	0.5
Pour Point, Degrees F	0
Flash Point, TCC Degrees F	210
Specific Gravity @ 77 Degrees F	1.086
Density @ 77 Degrees F, lb./gal.	9.05
Solubility, 10% in:
Water Dispersible
Xylene Insoluble
Isoporpanol Dispersible
Kerosene Insoluble